Handyman Guide To Finding and Fixing Squeaky Stairs

Handyman ConwayI remember growing up in an old house with squeaky stairs. My mom and dad never ever had them fixed and most of us got used to the squeaking. It is similar to someone that lives near a train terminal getting used to the noise of the trains. It was not until I was a teen slipping in during the night that I ended up being amazingly familiar with the ancient cacophony my careful tiptoeing created.

However, for everybody else on this earth that discovers ancient staircases are truly irritating and intends to fix them, here’s how.

Discover the location of the creaks

The very first point you should do, according to a handyman,  is to discover specifically where each step is squeaking. It helps to recognize exactly how wood stairs are developed. There are 3 major elements:

  1. Treads are the straight slabs that make-up the top of the steps. They’re just what we really tip on as we climb up a flight of staircases.
  2. Risers are the upright slabs that make-up the front of each step.
  3. Stringers are exactly what structures the stairs on both sides and what sustains the footsteps as well as risers.

How To Fix Squeaky Stairs

Since we recognize with the basic framework of wood stairs, it’s time to discover the creaks.

  1. Pace the staircases.
  2. On any type of old step, run your foot over the surface of the step to determine precisely where the creakiness is originating from. Creakiness is typically the outcome of loosened up slabs, nails, as well as screws grinding against each other, so the locations where the footsteps, risers meet are one of the most at risk.
  3. As you stand on a step, look very closely at those locations. A little space in between a tread as well as a riser is enough to make that step creaky. If the step squeaks yet the step as well as riser are flush, then the step or riser might have loosened up from the stringer.
  4. Finding loose stringer connections could be a little harder. It is easier if you have accessibility to the bottom of the stairs. Have somebody pace the stairways while you stand beneath trying to find problems with each action as someone stands on it.
  5. If you do not have accessibility to the bottom of the stairways, you will have to find the stringers from above.
  6. Tap on the walk – the touching will certainly seem less hollow if it is a stringer. You could also have the ability to find the stringers based upon the placement of existing nails or screws too.

If you have accessibility to the bottom of the stairways, there are a couple of points you could do.

  • You could place wedges or shims right into the spaces in between footsteps, risers, as well as stringers, then protect them with wood glue.
  • You could nail l or screw blocks of timber or L-shaped braces at the loosened up locations to tighten points up.
  • As a third choice, you could use wood glue or building glue to the voids.However. you’ will have to ensure the wood continues to be strongly in position up until the adhesive dries out.

If you still hear steps squeaking, it is time to call a trusted handyman who can do a better job. In this case, you can call Handyman Conway to help you fix those squeaky stairs.

Handyman Conway
Conway, SC  29526
843-353-6154
info@handymanconway.com